6V 41RPM 380:1 Micro Gear Motor with Encoder

A new micro metal gear motor of a special kind! This motor has a built-in encoder that measures the motor's speed in real time. The Hall sensor of the new version has 7 pole pairs, so the resolution of the encoder is increased 7 times. The average output pulse number is 7*2*380 pulses per shaft revolution. The motor has a 9mm long D-profile output shaft. The brass front panel has two threaded mounting holes for M1.6 screws. If you don't need accurate speed, you can also control the motor without an encoder. This motor is intended for use at 6V, but can already be operated at a voltage of 1V. 

Technical Details 

• Voltage: 1 to 6V 
  
• Motor speed: 15000RPM 
  
• Ratio: 380:1 
  
• One shaft revolution corresponds to: 5320 encoder pulses 
  
• Shaft length: 9mm 
  
• No-load revolutions: 41RPM 
  
• No-load current: 60 mA 
  
• Torque: 2.5 Kg*cm/0.25 Nm 
  
• Under load revolutions: 24rpm@6V 
  
• Under load current: 170mA 
  
• Dimensions: 12 x 10 x 40mm 
• Weight: 16g

Scope of Delivery:  

• 1x 6V 41RPM 380:1 Micro Gear Motor with Encoder 
• 1x 6-pin Connection Cable 15cm