ESP32 Serial Bus Servo Driver Expansion Board

With this servo driver board, you can control up to 253 serial bus servos via WiFi or Bluetooth. This board perfectly matches the SC15 programmable bus servos. The board has two 3pin UART sockets to connect the servos. You can connect via WiFi, Bluetooth or USB-C. The board is powered by a 6-12V barrel input. The controller already has test firmware installed, so you can easily control the servos for testing via the web interface. 

Attention: The input voltage must be the same as the servo voltage. So if you use the SC15 servos, the input voltage should not exceed 8.4V.  

Recommended accessories: 

• SC15 17Kg Serial Bus Servo
• 5V DC or 8V DC power supply

Features:  

• ESP32 Serial Bus Servo Driver Expansion Board
• WiFi 2.4GHz 
• Bluetooth 5.0 BLE 
• USB-C 
• UART Interface 
• Up to 253 servos 
• OLED Display Screen  

Documentation:  

• Waveshare Wiki

Technical details: 

• Manufacturer: Waveshare 
  
• Manufacturer SKU: 21593 
  
• Controller: ESP32 
  
• Input voltage: DC 5-12V 
  
• Interface: UART 
  
• USB-Interface: USB-C 
  
• Wireless: WiFi 2.4GHz, Bluetooth 5.0 BLE 
  
• Dimensions: 65 x 30 x 8mm 
  
• Weight: 26g 

Scope of delivery:  

• 1x ESP32 Serial Bus Servo Driver Expansion Board
  
• 1x Screw set