Standard Resin Yellow 0.5Kg UV 405nm eSun

This affordable standard resin from Esun offers you great value for money with good print quality. This standard UV photopolymer resin contains methacrylate monomers to reduce volume shrinkage during the light curing process, thus 3D printed objects of incredible fineness are possible. The resin is compatible with most DLP and LCD 3D printers. eSun is one of the largest manufacturers of high-quality resin used for 3D printing.

Recommended accessories:

Nitrile Protective Gloves L 100 Pack
Creality Resin Filter 20 Pieces
1 Liter Isopropyl alcohol / Isopropanol 99.8%

Standard Resin Features:

Best price-performance ratio among all resins for DLP and LCD printers.
Low volume shrinkage because the resin contains methacrylate monomers.
Specifically designed for LCD/LED SLA printers to achieve the best print quality.
The resin is compatible with all LCD printers with a wavelength of 405nm.
High hardness and scratch resistance of 78-82D (Shore).
Faster print speed.
High precision in printing.
Very good moisture resistance.
Long durability because the resin is delivered in light-tight aluminum bottles.

Application, important information:

Shake before use. Not too hard, so that no air bubbles form. Avoid direct sunlight during use.
Keep the resin out of the reach of children.
Wear gloves before use to avoid direct contact with skin.
Ventilate the room well.
In case of accidental contact with skin: Wash immediately with plenty of water.
Finished models must be cleaned with high-concentration alcohol (>95%) for about 30 seconds.