XY Joystick Module

This XY joystick module is comparable to a PS-2 game controller. The joystick features not only the analog XY signals but also a button that is activated when the joystick knob is pressed. The output of the joystick coordinates is analog and is via 2 outputs. To evaluate the XY signals, two analog inputs are required on the Arduino. A digital input is then used for the button. You can use the joystick to control a robot, motor, menu navigation, drone, and much more. Under the following link you will find a library on how to use the joystick as a mouse https://www.arduino.cc/en/Tutorial/JoystickMouseControl.

Connections:

Joystick         => Arduino UNO

GND              => GND

5V                  => 5V

VRx                => A0

VRy                => A1

SW                 => D2

Technical Details:

• Operating voltage: 5V
  
• XY Signal: 2x Analog
  
• Button: 1x Digital (without pull-up resistor, must be activated on the Arduino)
  
• Size: 34 x 26.5 x 32mm
  
• Weight: 11g
  

Delivery Contents:

• 1x XY Joystick Module