SenseCAP Solar Node P1-Pro MeshCore LoRa Repeater with GPS

The SenseCAP Solar Node P1-Pro is a solar-powered LoRa repeater specifically designed for use in the MeshCore ecosystem. The device comes pre-loaded with MeshCore repeater firmware, making it ready for immediate deployment. At its core, it features the Seeed XIAO nRF52840 Plus module, based on the nRF52 architecture, which enables highly energy-efficient power management. LoRa communication is handled by the integrated Wio-SX1262 module, supporting long-range connections with high reach. For precise positioning, an L76K GNSS module is included, capturing real-time GPS coordinates and transmitting them. The solar power supply enables continuous, off-grid operation, making it ideal for remote locations without external power sources. The repeater is fully compatible with the MeshCore network and supports decentralized, off-grid communication as well as integration with the MeshCore mobile app. Thanks to the nRF52-based power management, energy consumption is minimized even during continuous operation. The device is suitable for building meshed LoRa networks in areas without mobile coverage. The combination of GPS tracking, LoRa repeater functionality, and solar power makes the P1-Pro a versatile node for off-grid communication infrastructures. The node seamlessly integrates into existing MeshCore networks, reliably extending their range.

Recommended Accessories

• SenseCAP LoRaWAN GPS Asset Tracker T2000-C
• Wio LoRaWAN GPS Tracker 1110 Dev Board
• SenseCAP LoRaWAN GPS Tracker T1000-A with Sensors
• SenseCAP LoRaWAN GPS Asset Tracker T2000-B
• SenseCAP LoRaWAN GPS Tracker T1000-B

Features

• Solar power enables continuous off-grid operation at remote locations.
• MeshCore firmware is pre-installed and makes the device ready to use out of the box.
• GPS positioning is achieved via the integrated L76K GNSS module with real-time coordinate capture.
• LoRa communication is realized by the Wio-SX1262 module for long-range connectivity.
• Power management is based on the nRF52 architecture of the XIAO nRF52840 Plus module for ultra-low power consumption.
• MeshCore compatibility allows integration into decentralized off-grid networks and use of the MeshCore mobile app.

Use Cases

• Setting up a meshed LoRa repeater network in areas without mobile coverage.
• GPS-based tracking of devices or people in remote regions.
• Expanding existing MeshCore networks with solar-powered nodes.
• Use as an autonomous off-grid communication node for outdoor expeditions or disaster relief scenarios.

Documentation

• GitHub Repository
• Seeed Studio Wiki
• MeshCore Documentation
• Official MeshCore Website
• Data Sheet PDF

Technical Specifications

• Manufacturer: Seeed Studio
• Manufacturer SKU: 100023690
• EAN: 0792649738757
• Firmware: MeshCore Repeater (pre-installed)
• Microcontroller Module: Seeed XIAO nRF52840 Plus (nRF52 architecture)
• LoRa Module: Wio-SX1262
• GNSS Module: L76K (GPS)
• Power Supply: Solar
• Network Compatibility: MeshCore
• Packaging Dimensions: 308 × 224 × 78 mm
• Gross Weight: 1509 g

Contents

• 1× SenseCAP Solar Node P1-Pro MeshCore LoRa Repeater with GPS