PolyTerra PLA Electric Indigo Filament 1.75mm 1Kg

PolyTerra PLA is a very easy-to-print filament that enables reliable results for both beginners and experienced users. It is based on a bio-based material specifically developed for easy processing and high print quality. With its matte finish, prints look modern and high-quality. The excellent layer adhesion ensures stable parts while warping is minimized. Thanks to the balanced strength and flexibility, both decorative models and functional prototypes can be reliably produced. The processing is almost odorless and remains very stable even during long print times. PolyTerra PLA is wound on an environmentally friendly cardboard spool, emphasizing the sustainable claim of the product line. Typical applications include demonstration models, housings, parts with optical demands, and projects where environmental awareness and print quality are equally important.

Properties:

• PolyTerra PLA is a bio-based filament with a sustainable character.
• The matte finish gives printed objects a modern appearance.
• The material offers a good balance between strength and flexibility.
• Layer adhesion is stable and ensures precise results.
• The processing is almost odor-free.
• Warping occurs only to a small extent.
• PolyTerra PLA can be processed with consistent print quality.
• The cardboard spool supports the product's ecological approach.

Recommended Print Settings:

• Print temperature: 190–230 °C, recommended 200 °C
• Heated bed: 25–60 °C, recommended 50 °C
• Fan: 100%
• Print speed: 50-300mm/s

Documentation:

• Wiki and Datasheets Polyterra

Technical Data:

• Manufacturer: Polymaker
• Manufacturer SKU: PA04039
• Color: Electric Indigo 
• Weight (Net): 1 kg
• Diameter: 1.75 mm
• Tolerance: ±0.05 mm
• Density: 1.31 g/cm³
• Melt Flow Index: 14–20 g/10 min (210 °C/2.16 kg)
• Tensile Strength (XY): 23.2 MPa
• Tensile Strength (Z): 12.2 MPa
• Elongation at Break (XY): 27.8 %
• Elongation at Break (Z): 0.9 %
• Flexural Strength (XY): 40.4 MPa
• Flexural Modulus (XY): 2209 MPa
• Impact Strength (Charpy XY): 6.7 kJ/m²
• Heat Distortion Temperature (HDT 0.45 MPa): 57.8 °C
• Spool Diameter Outer: 200 mm
• Spool Width: 65 mm
• Inner Hole Diameter: 55 mm
• Weight (Gross): 1291g
• Dimensions: 205 x 225 x 75mm

Scope of Delivery:

• 1x PolyTerra PLA Electric Indigo Filament 1.75mm 1Kg