PLA+ Cold White Filament 1.75mm 5Kg eSun

This XXL 5Kg roll of PLA Plus in Cold White by eSun is based on standard PLA filament. The following properties have been optimized:

• Brittleness
• Resistance to breakage
• Layer adhesion
• Flame retardant
• Odorless during printing

Many consider eSUN PLA+ as the new standard for PLA printing, offering excellent value for money. It is not only easier to handle, but you also produce better 3D printed parts with smooth and clean surfaces.

Conclusion: PLA+ is very suitable for beginners and professionals alike, is easy to print and offers good adhesive properties and almost no wrap effect during printing. PLA+ is also a very good alternative to ABS, if something needs to be resistant to breakage, like printed children's toys! PLA+ has very good elasticity and resistance to bending to withstand falls, bumps, and stresses. No odors are produced when printing with PLA+, unlike with ABS.

Features of PLA+:

• Very resistant
• Easy to print
• Very good adhesion to the print board
• Top print quality and great value for money

Recommended PLA+ print parameters:

• Print temperature: 205-225°C Recommended: 210°C
• Heat bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed speed: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Safety Data Sheet PLA+
• Filament Data Sheet

Technical Details:

• Color: Cold White
• Item number: PLA+175CW5
• Filament weight: 5Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow rate: 2g/10min
• Impact strength: 7kJ/m²
• Elongation at break: 29%
• Tensile strength: 60MPa
• Thermal deformation stability: 52°C
• Spool diameter outer: 30cm
• Spool width: 16.5cm
• Spool hole diameter: 3.5cm

Delivery includes:

• 1x PLA+ Filament 1.75mm Cold White 5Kg eSun