ESP8266 Wled Board D75

With this Wled board, you can easily build a DIY decorative lamp that you can control via Wled. The WLED firmware is already installed on the ESP8266, so no USB UART programmer is needed to flash the firmware. The board is designed to be easily installed at the bottom of a decorative lamp. The board includes two buttons that allow you to control the lamp offline without wifi. Through the IR receiver, you can also control the Wled lamp easily with an IR remote control.

Info: If you want to build a 3D printed lamp, make sure that the heat dissipation is guaranteed through ventilation slots.

Recommended Accessories:

• Wled D75 Decorative Light Accessory Set
• WS2812B - 60 LED/m LED NeoPixel Strip 0.165m
• 5V DC 2000mA Plug-in Power Supply AC/DC Adapter 5.5mm/2.1mm Plug
• Strand 3 x 0.75mm² 18AWG White/Green/Red
• Creality Ender-3 S1 Pro 220x220x270 3D Printer

Features:

• 2x Buttons
• 1x IR Recipient IRM-3638T
• Wled Firmware already preinstalled
• Easy connection of the LED WS2812 or SK6812 strips via screw terminals
• APP for Android and iOS available
• JSON and HTTP request APIs
• MQTT

Wled Board Pinout:

Documentation and Links:

• Wled D75 Decorative Light Construction Guide
• STL Files for Decorative Light
• Wled Github
• Wled Documentation
• Wled Android App
• Wled iOS App

Technical Details:

• ESP8266 Module: Ai-Thinker ESP-12F
• Operating Voltage: 5V
• DC Connection: 5.5/2.1
• IR Receiver: IRM-3638T
• Diameter: 75mm
• Weight: 21g

Scope of Delivery:

• 1x ESP8266 Wled Board D75