eResin-PLA Pro Light Blue 0.5Kg UV405nm eSun

eResin-PLA Pro Light Blue is a PLA polyol synthesized UV-Resin by eSun. The resin is produced from organic compounds like PLA, making it very odor-neutral compared to conventional resin. The eResin-PLA Pro offers high strength, resolution, and an excellent price-performance ratio. The resin is compatible with mono- and multi-color displays and is suitable for delicate small models as well as larger ones. With its top price-performance ratio and neutral smell, we recommend the eResin-PLA Pro as a perfect beginner's resin, or as an affordable all-rounder for those experienced in resin printing. eSun is one of the largest manufacturers of high-quality resin used for 3D printing.

Recommended Accessories:

• Nitrile Protective Gloves L 100 Pack
• Creality Resin Filter 20 Pieces
• 1 Liter Isopropyl Alcohol / Isopropanol 99.8%

Features of eResin-PLA Pro: 

• Best price-performance ratio among all resin for DLP and LCD printers. 
  
• Organic PLA Polyol synthesized UV-Resin 
  
• Specially developed for LCD/LED SLA printers to achieve the best print quality. 
  
• The resin is compatible with all LCD printers at 405nm wavelength. 
  
• Odor-neutral 
  
• High strength  
  
• Smooth print surface 
  
• High resolution  

Application, Important Information: 

• Shake well before use. Not too hard, so no air bubbles form. Avoid direct sunlight during application. 
  
• Keep the resin away from children. 
  
• Wear gloves before use to avoid direct skin contact. 
  
• Ventilate the room well. 
  
• In case of accidental skin contact: Rinse immediately with plenty of water. 
  
• Finished printed models must be cleaned with high-concentration alcohol (>95%) for approximately 30 seconds. 
  
• Lastly, we recommend that you cure the printed parts under UV light until they reach their final strength. You can use UV-LEDs or natural sunlight (for 2-3 hours) as sources of UV light. 

Download: 

• Safety Data Sheet 
  
• Technical Data Sheet eResin-PLA Pro
  
• Printing parameters eResin-PLA Pro

Technical Data: 

• Manufacturer: eSun 
  
• Type: eResin-PLA Pro 
  
• Color: Light Blue
  
• Manufacturer SKU: ERESINPLAPRO-SB05
  
• Viscosity: 200-300mPa*s 
  
• Density: 1.1g/cm3 
  
• Tensile strength: 37-48MPa 
  
• Elongation at break: 25-28% 
  
• Bending strength: 36-49MPa 
  
• Impact resistance: 32-36J/m 
  
• Hardness (Shore D): 78-80 
  
• Resin weight: 500g

Package Contents:  

• 1x eResin-PLA Pro Light Blue 0.5Kg UV405nm eSun