eResin-PLA Pro Clear 0.5Kg UV405nm eSun

eResin-PLA Pro Clear/ Transparent  is a PLA Polyol synthesized UV-Resin by eSun. The resin is made from organic compounds like PLA, making it very odorless compared to conventional resin. eResin-PLA Pro impresses with its high strength, resolution, and excellent value for money. The resin is compatible with mono and multi-color displays and is suitable for small, delicate models, as well as larger ones. With top value for money and neutral odor, we recommend the eResin-PLA Pro as the perfect beginner's resin, or as an affordable all-around solution for experienced resin printers. eSun is one of the largest manufacturers of high-quality resin used for 3D printing.

Recommended accessories:

• Nitril Protective Gloves L 100 pack
• Creality Resin Filter 20 pcs
• 1 Liter Isopropyl Alcohol / Isopropanol 99.8%

Properties of eResin-PLA Pro: 

• Best price-performance ratio among all resin for DLP and LCD printers. 
  
• Organic PLA Polyol synthesized UV-Resin 
  
• Specifically designed for LCD/LED SLA printers to achieve the best print quality. 
  
• The resin is compatible with all LCD printers with a 405nm wavelength. 
  
• Odorless 
  
• High strength  
  
• Smooth printing surface 
  
• High resolution  

Application, important information: 

• Shake before use. Not too hard to avoid forming air bubbles. Avoid direct sunlight during application. 
  
• Keep the resin away from children. 
  
• Wear gloves before use to avoid direct contact with skin. 
  
• Ventilate the room well. 
  
• In case of accidental contact with skin: Rinse immediately with plenty of water. 
  
• Finished printed models must be cleaned with high-concentration alcohol (>95%) for about 30 seconds. 
  
• Finally, we recommend that you cure the printed parts under UV light until the final strength is achieved. As a UV light source, you can use UV LEDs or, alternatively, sunlight (2-3h).  

Download: 

• Safety data sheet  
  
• eResin-PLA Pro technical data sheet
  
• eResin-PLA Pro print parameters

Technical details: 

• Manufacturer: eSun 
  
• Type: eResin-PLA Pro 
  
• Color: Clear
  
• Manufacturer SKU: ERESINPLAPRO-T05
  
• Viscosity: 200-300mPa*s 
  
• Density: 1.1g/cm3 
  
• Tensile strength: 37-48MPa 
  
• Elongation at break: 25-28% 
  
• Flexural strength: 36-49MPa 
  
• Impact strength: 32-36J/m 
  
• Hardness (Shore D): 78-80 
  
• Resin weight: 500g

Delivery contents:  

• 1x eResin-PLA Pro Clear 0.5Kg UV405nm eSun