Castable Resin for Jewelry Green 0.5Kg UV 405nm eSun

With this pourable resin from eSun, you can create casting molds for jewelry made of gold, silver or copper. The resin leaves no residue after burning out in the plaster mold, making it perfect for this application. The Jewelry Castable Resin is very popular with goldsmiths who design unique pieces of jewelry on the 3D printer. After printing, the resin needs to be cleaned with highly concentrated alcohol (>95%) for about 30 seconds. The resin is then coated with plaster and burnt out in a kiln at 780°C for several hours. More precise information can be found in the documentation under User Manual. 

Recommended accessories:

• Nitrile Protection Gloves L 100 Pack
• Creality Resin Filter 20 Pieces
• 1 Liter Isopropyl Alcohol / Isopropanol 99.8%

Features: 

• Pourable resin for jewelry casting molds 
• Suitable for gold, silver and copper 
• Leaves no residue 
• High resolution 

Application, important information: 

• Shake before use. Not too hard, so that no air bubbles form. Avoid direct sunlight during application. 
• Keep the resin away from children. 
• Wear gloves before use to avoid direct contact with the skin. 
• Ventilate the room well. 
• In case of accidental contact with the skin: Wash immediately with plenty of water. 
• Finished printed models must be cleaned with highly concentrated alcohol (>95%) for about 30 seconds.

Documentation: 

• Technical data sheet Castable Resin
  
• Printing parameters Castable Resin
  
• Safety data sheet Castable Resin

Technical details: 

• Manufacturer: eSun 
  
• Type: Castable Resin 
  
• Manufacturer SKU: CASTABLERESIN-JEW-G05 
  
• Color: Green 
  
• Viscosity: 100-150mPa*s 
  
• Density: 1.05-1.12g/cm3 
  
• Tensile strength: 42-62MPa 
  
• Elongation at break: 10-20% 
  
• Flexural strength: 49-58MPa 
  
• Impact resistance: 44-49J/m 
  
• Hardness (Shore D): 60 
  
• Weight Resin: 500g

Delivery content: 

• 1x Castable Resin for Jewelry Green 0.5Kg UV 405nm eSun