1200x825 9.7inch Black/White E-Ink Display Raspberry Pi HAT

This is a large 9.7-inch E-Ink / ePaper display module with 640 × 384 pixel resolution. The module has an integrated IT8951 controller that communicates via USB, SPI, I80, or I2C interface. This black and white display supports partial updates. Thus, individual areas can be updated quickly within 0.3 seconds. A full display refresh also takes only 1 second. Due to its low power consumption, it is excellent for battery-powered applications. These displays are also used in sales as price tags, where they can be operated for several years with a battery. The display has a very good viewing angle and can be easily read even in sunlight. It takes 6 seconds for the image to build up across the entire display. Therefore, it is not intended for applications where the display needs to be refreshed every 1 second.

Features:  

• Displays remain visible even without power supply 
• Ultra-low power consumption 
• Power is basically only needed for refreshing  
• USB/SPI/I80/I2C interface for connection with host boards like Raspberry Pi or Nucleo
• Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
• Good documentation and example code available on Waveshare Wiki 
• Programming examples available for the following controllers: STM32 and Raspberry Pi 

Documentation: 

• Waveshare Wiki

Technical Details:  

• Type: GDEP097TC2
• Driver Chip: IT8951
• Operating Voltage: 5V  
• Interfaces: USB/SPI/I80/I2C
• Outer Dimension: 218.8 × 156.425 x 1.15mm  
• Display Dimension: 202.8 × 139.425mm  
• Pixel Size: 0.169 × 0.169mm   
• Resolution: 1200 x 825
• Display Color: Black, White  
• Gray Level: 2-16   
• Full Refresh Time: <1s  
• Viewing Angle: >170°  
• Weight: 397g  

Package Contents  

• 1x 1200x825 9.7-inch Black / White E-Ink Display Raspberry Pi HAT
• 1x e-Paper IT8951 Driver HAT
• 1x 9.7-inch e-Paper Adapter
• 1x 33PIN FFC Cable
• 1x Mounting Material for Raspberry Pi
• 1x PH2.0 8-Pin 20cm Cable for STM32 or Alternative Microcontroller