PN532 NFC RFID Module V3 Set with RFID Card and Key

The PN532 is a very flexible chip as it can be addressed via 3.3V TTL UART, I2C, or SPI. With the PN532, you can also read NFC chips. The PN532 can operate with all RFID and NFC chips from type 1 to 4 as well as with NXP MiFare tags. With the PN532, you can also simulate an NFC tag and read it with an NFC capable phone. You can set the desired communication via the DIP switches on the board. e.g. UART, SPI, or I2C. You can find a suitable library in Arduino, if you search for PN532 under libraries.

At our store, you can also buy many other components and accessories for your Arduino, ESP32, ESP8266, and Raspberry Pi projects, just browse our online shop!

Supports the following cards: 

• Mifare 1k, 4k, Ultralight, and DesFire cards
  
• ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)
  
• FeliCa cards such as RCS_860 and RCS_854

Technical Details:

• Chip: PN532
  
• Interfaces: I2C, SPI, Uart
  
• Frequency: 13.56MHz
  
• Color: Red
  
• Reading distance: approx. 5 to 7cm
• Diameter mounting holes: 3mm
  
• Dimension card RC522 S50: 85.5 x 54 x 0.85mm
  
• Dimension S50 key fob: 40.5 x 32 x 3.8mm
  
• Dimension PN532 module: 43 x 40 x 3.5 mm
  
• Weight: 20g

NFC library
Manual

Scope of Delivery:

• 1x PN532 module V3
  
• 3x 4p angled pin headers
  
• 4x Dupont cable F/F 20cm
  
• 1x Mifare S50 card transponder tag
  
• 1x Mifare S50 key fob transponder tag