PN532 NFC HAT for Raspberry Pi
This is a Raspberry Pi NFC HAT that has a PN532 chip with which you can read and write 13.56MHz NFC / RFID cards. This NFC HAT for Raspberry supports three communication interfaces: I2C, SPI, and UART. NFC (Near Field Communication) is a wireless technology that enables contactless point-to-point data communication between devices at a distance of approximately 10cm. It is often used in applications such as access control systems, contactless payment systems, meal cards, smartphone NFC applications, etc.
Features of PN532 NFC HAT:
- Compatible with the standard Raspberry Pi 40pin GPIO extension bar. Can therefore be used with any Raspberry Pi
- Onboard PN532 chip, supports various NFC/RFID cards such as MIFARE/NTAG2xx, etc.
- Three selectable communication interfaces: I2C, SPI and UART, configured via jumper and switch.
- Breakout pin bar, so you can easily connect this PN532 NFC HAT to an Arduino, ESP32, ESP8266 or STM32.
- Programming examples for the following controllers available: Arduino, stm32 and Raspberry Pi
Documentation:
Connectors and functions of PN532 NFC HAT:
- Raspberry Pi GPIO port: for connection with Raspberry Pi
- PN532 control pins: for connection with other host cards such as STM32
- NFC induction coil
- PN532 chip: NFC controller
- Power indicator
- DIP switch: for configuring the connection between PN532 and Raspberry Pi (only one of the I2C/SPI/UART can be connected at a time).
- Mode selection:
- I0-L, I1-L: Enable UART
- I0-H, I1-L: Enable I2C
- I0-L, I1-H: Enable SPI
- INT0 jumper: response signal, connects with Raspberry Pi D16
- RSTPDN jumper: Reset signal, connects with Raspberry Pi D20
Technical Details:
- NFC Controller: PN532
- Operating voltage: 3.3V/ 5V
- Operating frequency: 13.56 MHz
- Communication interfaces: I2C, SPI, UART (standard)
- Standard baud rate: 115200 bps
- Operating modes:
- Read/Write mode with support of ISO/IEC 14443A / MIFARE
- Read/Write mode with support of FeliCa
- Read/Write mode with support of ISO/IEC 14443B
- Card operating mode supports ISO 14443A / MIFARE
- Card operating mode with support of FeliCa
- ISO/IEC18092, ECM340 point-to-point
- Dimension: 85 x 56 x 23mm
- Weight: 31.8g
Package contents:
- 1x PN532 NFC HAT for Raspberry Pi
- 1x RFID key fob
PN532 NFC HAT for Raspberry Pi
- Brand: Waveshare
- Product Code: 421021
- Availability: In Stock
-
CHF19,90
- Ex Tax: CHF18,41
Related Products
RFID RC-522 Card Reader Set with Transponder
This RFID set is perfect for your first experiments with RFID and Arduino or Raspberry Pi. With this..
CHF9,90 Ex Tax: CHF9,16
RFID Key Tag Keychain 13.56MHz RC522/ M1 S50
This RFID KEY is the same as included in the RC522 card reader set. Since one key is usually not eno..
CHF1,90 Ex Tax: CHF1,76
RFID Tag Card Credit Card 13.56MHz RC522/ M1 S50
This RFID card is the same as included in the RC522 card reader set. As one card is usually not enou..
CHF1,50 Ex Tax: CHF1,39
PN532 NFC RFID Module V3 Set with RFID Card and Key
The PN532 is a very flexible chip as it can be addressed via 3.3V TTL UART, I2C, or SPI. With the PN..
CHF18,90 Ex Tax: CHF17,48
NFC TAG Sticker Ntag213 13.56 MHz
This NCF adhesive TAG can be read and written with all common NFC mobile phones. This NFC tag can al..
CHF0,90 Ex Tax: CHF0,83
Gravity PN532 NFC RFID Module with UART and I2C
The DFRobot Gravity NFC RFID module uses an NXP PN532 chip. The PN532 is a highly integrated NFC com..
CHF29,90 Ex Tax: CHF27,66
Waveshare NFC Development Kit ST25R3911B Writing Device
The ST25R3911B NFC Development Kit is based on the ST25R3911B and features an AT32F413RCT7 controlle..
CHF28,90 Ex Tax: CHF26,73
NFC TAG Stickers Ntag215 13.56 MHz
This NTAG215 NFC adhesive tag can be read and written with all common NFC mobile phones. This NFC ta..
CHF1,00 Ex Tax: CHF0,93
NFC TAG PVC Coin Ntag215 13.56 MHz
This NTAG215 NCF PVC TAG can be read and written with all common NFC mobile phones. This NFC tag can..
CHF1,50 Ex Tax: CHF1,39
RFID Silicone Wristband 13.56MHz Ntag213
The RFID silicone wristband with 13.56 MHz and NFC 213 chip offers you a comfortable and secure way ..
CHF7,90 Ex Tax: CHF7,31
NFC RFID reader module card reader UART WG26/WG34
The NFC RFID reader module with IC card reading functionality is a versatile and compact card reader..
CHF15,90 Ex Tax: CHF14,71
LilyGo T-Embed CC1101 Black ESP32-S3 with Encoder and Display
The LilyGo T-Embed CC1101 is a compact and powerful hacking gadget, ideal for hobbyists, tinkerers, ..
CHF69,90 Ex Tax: CHF64,66
LilyGo T-Embed CC1101 Plus Black ESP32-S3
The LilyGo T-Embed Plus CC1101 is a compact and powerful hacking gadget, ideal for tinkerers, hobbyi..
CHF79,90 Ex Tax: CHF73,91
Tags: PN532, Module, Waveshare, HAT, Raspberry, Breakout, Board, UART, SPI, RFID, I2C, 3.3V, 5V, TAG, Transponder, S50, Reader, Card, NCF, Reader, Android, Mifare, DesFire, CD97BX, P5CN072, FeliCa, Raspberry, Door locking system, Locking system, Access control, Payment system, 614961955530, 16958.